Low frequency resistance spot welding machine МТН-100.01
Description
Machine МТН-100.01 is designed for resistance spot welding by low frequency current of super duty parts from aluminum, heat resistant and titan alloys, corrosion resistant, low alloyed and carbon steels.
In comparison with similar DC machines, using current of lower frequency in the machine МТН-100.01 allows reducing power consumption by 1.5 times.
The machine is equipped with programmable microprocessor controller unit which provides wide range of welding variables, indication of current value and clamping force.
Technical data
CHARACTERISTIC | VALUE | |
Rated supply main voltage of 3-phase AC, V | 380 | |
Supply main frequency, Hz | 50 | |
Rated continuous secondary current, kA, not less | 20 | |
Rated stick-out, mm | 1 250 | |
Max. duration of one impulse of welding current at the last stage, s Наибольшая длительность включения одного импульса сварочного тока на последней ступени, с | 0.14 | |
Max. short term performance, welds/h | 3 600 | |
Power at duty cycle = 50 %, kVA | 112 | |
Electrode stroke, mm | operational | 30 |
additional | 20 | |
Gripping force, daN | max. | 5 100 |
min. | 200 | |
Recommended range of thickness, mm | from aluminum alloys | from 0.5 + 0.5 up to 4.5 + 4.5 |
from titan alloys, stainless and heat resistant steels | from 0.6 + 0.6 up to 4 + 4 | |
from low carbon steels | from 1.0 + 1.0 up to 10 + 10 | |
Machine drive | pneumatic | |
Dimensions, mm (length х width х height) | 4 000 × 850 × 3 100 | |
Mass, kg | 6 800 |